beplay218哥特式拱形温室评论-托马斯·卢兹

查塔姆纽约

14' x 20'的旅行墙

施工开始于清理该地区周围的树木。五月初，地面融化得足以挖地基了。在水泥干燥和石头到位后，哈迪板(从谷仓回收)侧墙被附着。框架的所有木制部件都用砂纸打磨，并刷上2到3层桐油。6月4日，我们邀请了两位朋友来帮忙吊起拱门。两边都在两个小时内完成。第二周，我们安装了多晶硅面板和山脊。我们在温室的两侧安装了排水沟，收集流走的水。两个桶接住那水。一场细雨很快灌满了两个75加仑的雨水桶，这些雨水桶又被用来满足温室的所有用水需求。 Six fish and a few snails keep the water buckets clear and clean. We finished the inside of the knee walls with about 2000 pounds of black slate (recycled from a roof) and poured 4 inches of pea gravel on the floor to absorb heat during the day and keep the greenhouse warm during the evening. Finally, 30” tables were constructed on each side of the greenhouse for potting and growing while a 4’ x 8’x 20”raised bed was built in the middle. Radishes, basil and beets are growing in that bed now despite the cool temperatures outside. We plan to add more vegetables soon.

风扇的布线很快就完成了，而且工作得很好。喷雾系统仍在工作中。总而言之，这是一个有趣的经历，非常令人满意。我们收到很多朋友的问题，很多人对我们的温室表示钦佩。

汤姆和克里斯汀

beplay218

关于项目»

温室控制系统

温室控制系统

温室控制系统